Moisture proof treatment method for infrared emission tube

Moisture prevention during transportation
When transporting infrared emission tubes, moisture-proof measures should be taken, such as using sealed packaging to prevent external moisture from entering the packaging and affecting the emission tubes. Because if the infrared emitter tube gets damp during transportation, it may damage its performance and affect its subsequent use. At the same time, other precautions should also be followed during transportation, such as strictly prohibiting transportation with dangerous goods, strictly prohibiting high throwing and falling, stacking height not exceeding 3 layers, and strictly prohibiting stacking other goods on the upper layer of the outer box, in order to fully protect the integrity of the infrared emission tube during transportation
Moisture prevention during storage
Do not open the moisture-proof bag before the product is ready for use. If the moisture-proof bag is opened too early, external moisture can easily enter and come into contact with the launch tube, causing it to become damp. Before opening the package, the LED should be kept under environmental conditions of 30 ° C or lower and 90% RH (relative humidity) or lower; After opening the package, the LED should be kept in an environment of 30 ° C or lower, 60% RH or lower, and should be used (silicone) within 168 hours (7 days) after opening the package. If it has faded or the infrared emitting tube has exceeded the storage time, it needs to be baked at 60 ± 5 ° C for up to 24 hours